Page 234 - 121228-VanLeeuwen

Basic HTML Version

APPLICATION NOTES
CUSTOM LENGTHS WITH HEAVY DUTY SPRINGS
www.vleonline.com
232
SUSPENSION
DEALER
SUPPORT
HANDLEBARS
& GRIPS
CHAIN &
SPROCKETS
BRAKES &
ROTORS
STREET
APPAREL
STREET
ACCESSORIES
CHEMICALS
& LUBES
ELECTRICAL
INDEX
HELMETS
MXAPPAREL
CLUTCHES
SUSPENSION
MIRRORS
MANUALS
LUGGAGE
MISC.
SECURITY
FILTERS
GOGGLES &
EYEWEAR
MX /ATV
EQUIPMENT
TIE DOWNS
TIRE &
WHEEL
ORDER
SHEET
EXHAUST
VS700 Intruder
85- 87
440-4214B/C+
VS750 Intruder
88- 91
440-4214B/C+
VS800 Intruder/Blvd.S50
92- 09
440-4214B/C+
VZ1600Marauder/Blvd.M95
04- 05
440-4240B/C
440-4241B/C
440-4242B/C
440-4243B/C+
TRIUMPH
Bonneville
01- 10
440-4209B/C
440-4213B/C
440-4244B/C+
Rocket III
04- 10
440-4230B/C
440-4232B/C
440-4233B/C+ 440-4221B/C
T100
02- 10
440-4209B/C
440-4213B/C
440-4244B/C+
1000 Virago
84- 85
440-4214B/C
1100 Virago
86- 99
440-4214B/C
535 Virago
87- 00 440-4235B/C
440-4201B/C
440-4228B/C+
440-4207B/C
412-4233C
700 Virago
84- 87
440-4214B/C
750 Virago
88- 97
440-4214B/C
V-Max 1200
85- 92
440-4214B/C
440-4218B/C+
V-Max 1200
93- 07
440-4214B/C
440-4218B/C+
For Pricing and Van Leeuwen Part #’s see page 235-237
Model
YEAR 11" 440 11.5" 440 12" 440 12.5" 440 13" 440 13.5" 440 11" 412 11" FC 412
01 Stock spacer may be shortened to fit.
02 Chain drive 920 and Europeanmodel require a 1.50" spacer.
03 Spacers are not included. Theymay easily be fabricated fromaluminumor PVCpipe.
05 Spacer required is furnishedwith springs.
06 Left hand fork: Remove and discard stock spacer and use 3.5" spacer supplied. Right hand fork: Shorten stock spacer to 4.2".
07 Install newspacer (1.75" PVC) belowstockmetal spacer to allowadjustable cap to function.
08 Reuse the stock spacer.
09 Remove and discard the stock spacer.
10 No spacer is required.
11 Some leading axles require spacer. See note 3.
13 Spacer lengthmust be calculated according to the instructions includedwith the fork springs.
18 Cut the included spacer to length indicated.
19 Youmust add a spacer (length indicated) to spacer furnishedwith springs or make a spacer that is the same length as the two combined.
20 This particular bike has two different fork legs. The left fork leg requires the stock fork spacer to be shortened to 3.25". The right fork leg requires the
stock spacer to be removed and discarded. No spacer is needed in the right fork leg. ABSmodel, refer to note #13 for preload spacers.
21 Left hand fork: Cut spacer to 6.75" long (remove 1.0"). Right hand fork: Cut spacer to 2.63" long (remove 1.0").
22 Fork lowing kit only lowers forks 1.00" inch.
23 P/N #31-3002 -Adjustable Sway-Bay ClampKit - not for use on "S"model.
24 31-2502 & 31-2504MonoTube Kits NOT for FLSTFmodels
25 11-1549 Fork SpringKit lowers front ride height approximately 20mm to achieve optimum ride sag and front end cornering grip.
R01 Travel limiters required: .25". Order #30-5013
R02 Travel limiters required: .50". Order #30-5014
R03 Travel limiters required: .75". Order #30-5015
R04 The shock recommended is slightly longer than stock. Thismay alter the head angle slightly and give somewhat quicker steering. Extended clearances should be checked aswell.
R05 The shock recommended is slightly shorter than stock. Thismay alter the head angle slightly and give somewhat slower steering.
R06 SeeAir Shock Improvement KitsAandB.
R07 Optional "Super Heavy Duty" spring is available, for the 12 Series, order #03-1364B/C. The air shock recommended is for a full dress touringmotorcycle, use the "Sport Tuned"model
for a standardmotorcyclewithout touring equipment.
R09 Suzuki andKawasaki equippedwith air compressors require an adaptor. Order #30-5086.
R10 Hondawith air compressors require an adaptor. Order #30-5082.
R11 KModels: 412-4015B is standard length 14.00" E/E. Also available in 3/4 inch shorter than standard, 412-4016B 13.25" E/E. 420-1001 is standard length 14.00" E/E.
R12 20 Series single shock for HondaGT650 Hawk soldw/out spring, reuseOEMstock spring.
R13 Check tire to fender clearance. If tire to fender clearance is insufficient, travel limiters are available. (See notes R01 toR03.)
R14 The stock length shock on a 93-07 FXD/FXDL/FXDWG is 12 5/8". Installing 11.50" ORSHORTER shocks on the FXDWG requiresmodification to the fender.
R15 Stock length on a FXDS-Conv./FXDX is 13.0". Shorter lengthswill lower themotorcycle.
R16 Approximate stock shock length is 11.75".
R17 Use #5011-038 sleeve kit.
R18 Rear spring listed is a replacement for the stockOEMspring fitted to the stockOEMshock absorber only, not for use on 20 Series shock absorber.